TIME SCANNER
Atari
1987
PINOUTS:

          SOLDER  |  PARTS
    ---------------------+----------------------
               GND   | 1 | A |   GND
               GND   | 2 | B |   GND
               +5V   | 3 | C |   +5V
               +5V   | 4 | D |   +5V
              +12V   | 5 | E |   +12V
         Counter 2   | 6 | F |   Counter 1
           2P.Lamp   | 7 | G |   1P.Lamp
                     | 8 | H |   
   2P.Flipper Left   | 9 | I |   1P.Flipper Left
  2P.Flipper Right   |10 | J |   1P.Flipper Right
                     |11 | K |   
                     |12 | L |   
           2P.Push   |13 | M |   1P.Push
          2P.Right   |14 | N |   1P.Right
           2P.Left   |15 | O |   1P.Left
        * Ext Sw 5   |16 | P |   * Ext Sw 1
        * Ext Sw 6   |17 | Q |   * Ext Sw 2
        * Ext Sw 7   |18 | R |   * Ext Sw 3
        * Ext Sw 8   |19 | S |   * Ext Sw 4
          1P.Start   |20 | T |   Coin 1
          2P.Start   |21 | U |   Coin 2
                     |22 | V |   Test
                     |23 | W |   Service
         Speaker -   |24 | X |   Speaker +
             Green   |25 | Y |   Red
              Sync   |26 | Z |   Blue
               GND   |27 | a |   GND
               GND   |28 | b |   GND


* Ext Sw. When setting the following, connect each of the edge connector's 
          alphanumerically refered pins to any of the ground pins.