JOURNEY Manufacturer: Bally Midway Year: 1983 Genre: Platform Orientation: Vertical Conversion Class: See Pinouts Special Drive: Cassette Tape Drive - Plays background audio DIP Switch Settings: As submitted by cjsmith@amoco.com Switch No 1 (At B3 - Located on SOund I/O P.C. Board) Function SW#1 SW#2 SW#3 SW#4 SW#5 SW#6 SW#7 SW8 SW#9 SW#10 XX XX XX XX XX XX 1 Coin Meter ON ** @ Coin Meters OFF Upright/Mini ON Cocktail Table OFF **Coin Continue (On) ON Coin Continue (Off) OFF Freeze Video ON **Normal Operation OFF Switch No 3 (At D14 - Located On Sound I/O P.C. Board) Function SW#1 SW#2 SW#3 SW#4 **Normal Operation OFF Sound I/O Diag Mode ON **Normal Operation OFF RAM/ROM Test ON Indicates Test Results VIA YELLOW LED ON SOUND I/O Board FAST FLASH = BAD ROM SLOW FLASH = BAD RAM **Normal Operation OFF Oscillator Test ON **Normal Operation OFF Filter Test ON * No Effect If SW#1 of Switch NO. 3 Is In the OFF Position ** Factory Recommended Settings XX Not Used The remainder of the sames common option settings are conducted during the MACHINE SETUP portion of the self-test mode. RACK ADVANCE 1. Turn the power to the game on. 2. Open the coin door NOTE: Cocktail Table Models Only Gently pull out the plunger on the Safety Interlock Switch located just inside the coin door 3. Using the Test Credit Button, put a credit on the game 4. Press the "1 Player" start button 5. IMMEDIATELY set the games Self-Test switch to the ON position. 6. By pressing both the "1 Player" and " 2 Player" start buttons at the same time (ONLY WHEN THE TRANSPORT SHIP IN THE CENTER OF THE 5 PLANETS), the game will advance to the next rack. 7. When finsihed, set the Self-Test switch back to the OFF position